New Mexico engineering services
PE Stamp and Permit-Ready Plans in New Mexico
Need a PE stamp in New Mexico? Drawings sealed by a New Mexico-licensed engineer for city permits and Construction Industries Division review.
- Stamped by a PE licensed in New Mexico
- Accepted by New Mexico building departments
- Residential, commercial and industrial
New Mexico plans for high desert, mountains and the oil patch
A PE stamp in New Mexico covers an unusually wide range of building traditions. One project might be a flat-roofed Pueblo Revival addition in Santa Fe with parapets, canales and viga ceilings. Another might be a steel shop in Hobbs, a manufactured home on a permanent foundation in Valencia County, or a shade portal on a stucco home in Las Cruces. Each needs drawings that respect how the building is actually built, and calculations that hold up to a plan reviewer, whether that reviewer works for a city or for the state.
We prepare structural, architectural and MEP drawings for homeowners, contractors, developers and energy companies across the state. Southeastern New Mexico’s Permian Basin brings requests for equipment skids, tank foundations and access platforms, while the Rio Grande corridor generates additions, casitas, garage conversions and small commercial build-outs. For homes set on rural lots, see our manufactured and modular home foundations.
Sealing is done by a New Mexico-licensed Professional Engineer from our network of state-licensed PEs, whether the reviewer is a city plans examiner or a CID plan reviewer. Send photos, a sketch or an existing plan and we reply with a fixed fee, usually the same day. Rush service is available, and corrections requested during plan review are made within the original scope at no extra charge.
How licensing works. Engineering drawings must be sealed by a Professional Engineer licensed in New Mexico. PE Engineer works with a network of state-licensed PEs, so every set we deliver is reviewed and stamped by an engineer who holds an active license in New Mexico. Their name and license number appear on the seal, exactly as your building department requires.
Popular in New Mexico
- Casitas, guest houses and garage conversions
- Portals, ramadas and patio covers
- Additions to adobe, frame and stucco homes
- Manufactured home permanent foundations
- Oilfield equipment skids and tank foundations
- Steel shops and agricultural buildings
Engineering services for New Mexico projects
Every discipline a New Mexico permit or project owner asks for, delivered as one coordinated set.
Structural engineering in New Mexico
Flat roof framing with parapets and roof drains, viga and beam sizing, foundations for collapsible and expansive soils, snow loads at Santa Fe, Taos and Ruidoso elevations, and steel shop design.
Architectural plans in New Mexico
Floor plans, elevations and site plans for casitas, additions and new homes, plus tenant improvement and change of use plans, drawn to the New Mexico Residential or Commercial Building Code.
MEP engineering in New Mexico
Evaporative and refrigerated cooling, heating for cold high-desert nights, plumbing and electrical plans, energy code documentation, solar PV drawings, and fire sprinkler and alarm plans for commercial spaces.
Industrial and equipment stamps in New Mexico
Skid and tank foundations, compressor and separator anchorage, pipe racks, access platforms and OSHA stairs for oil and gas sites in Lea and Eddy counties, plus racks and mezzanines for warehouses.
New Mexico building codes we design to
New Mexico adopts statewide codes through the Construction Industries Division of the Regulation and Licensing Department. The state publishes its own commercial and residential building codes based on the International Codes, along with a code for earthen construction. Albuquerque, Santa Fe, Las Cruces and other cities with their own building departments enforce these codes locally, and CID handles areas without local enforcement. We design to the edition your jurisdiction has adopted.
- New Mexico Commercial Building Code, based on the IBC
- New Mexico Residential Building Code, based on the IRC
- New Mexico Earthen Building Materials Code for adobe and rammed earth
- New Mexico Energy Conservation Code
- New Mexico Plumbing and Mechanical Codes, based on the UPC and UMC
- New Mexico Electrical Code, based on NFPA 70
Soils, snow, wind and seismic in New Mexico
Soil is often the first concern. Collapsible soils that lose strength when wetted are found in parts of the Rio Grande valley and the southern deserts, and expansive clays appear elsewhere, so footing depth, moisture control and drainage away from the foundation matter. Summer monsoon storms bring short, intense rainfall and flash flooding in arroyos, and flat roofs need properly sized drains and scuppers to avoid ponding. Our grading and drainage plans address both.
Elevation changes the loads quickly. Santa Fe, Taos, Los Alamos, Ruidoso and the mountain communities carry real ground snow loads and deeper frost than Las Cruces or Carlsbad. Spring winds are strong across the plains and mesas, which drives uplift design for portals, carports and metal buildings. The Rio Grande rift also gives central New Mexico moderate seismic activity, and forested mountain areas face wildfire risk that can affect material choices.
How the permit process works in New Mexico
Who reviews your plans depends on location. Inside Albuquerque, Santa Fe, Las Cruces, Rio Rancho and other cities with building departments, the city reviews and inspects. In unincorporated areas and smaller towns without local enforcement, permits are typically issued and inspected by the state Construction Industries Division. Counties still handle zoning and, in many cases, floodplain approval.
- Confirm whether your site falls under a city building department or CID.
- We prepare sealed drawings, calculations and any energy or site documents required.
- The reviewer checks the set and issues comments or corrections.
- We respond and revise, the permit is issued, and inspections follow.
Historic districts in Santa Fe and some other communities have additional design review for exterior changes, so we plan elevations with those requirements in mind. On tribal land, federal property or within some pueblos, a different authority may review the work, and we can adapt the drawings to whatever review applies.
Cities and counties we serve in New Mexico
- Albuquerque
- Las Cruces
- Rio Rancho
- Santa Fe
- Roswell
- Farmington
- Hobbs
- Clovis
- Carlsbad
- Alamogordo
- Gallup
- Los Lunas
- Deming
- Taos
- Bernalillo County
- Doña Ana County
- Sandoval County
- Lea County
Plus every other city, town and county in New Mexico. If your project is in New Mexico, we can stamp it.
How it works
From first message to stamped drawings, you deal directly with the engineering team.
Step 1
Send your project
Fill out the quote form with the address, scope and any drawings, photos or plan-check comments you already have. Two minutes is enough.
Step 2
Get a fixed-fee quote
An engineer reviews the scope and replies with a clear fixed price and delivery date for your project in New Mexico. No hourly surprises.
Step 3
Engineering and drafting
We run the calculations, prepare the drawings to the codes your jurisdiction enforces, and check every sheet before sealing.
Step 4
Stamped set delivered
You receive the sealed PDF set ready to submit. If the plan reviewer has comments, we answer them and revise at no charge within scope.
PE stamp and permit plan FAQs for New Mexico
Can you provide a PE stamp for my project in New Mexico?
Yes. Your drawings are reviewed and sealed by a Professional Engineer licensed in New Mexico, through our network of state-licensed PEs. Drawings from a builder, designer or equipment manufacturer can be reviewed and sealed as well as plans we draw ourselves.
Do you work with adobe and earthen buildings?
Yes. We evaluate existing adobe and earthen walls for additions and openings, design bond beams and lintels, and prepare drawings that reference the New Mexico Earthen Building Materials Code where it applies. New framing is tied into the existing structure with clear details.
Can you design a permanent foundation for my manufactured home?
Yes. We design permanent foundations for manufactured and modular homes, including piers, anchors and perimeter walls, for permit, financing or title conversion. The design accounts for your local frost depth, wind exposure and soil conditions.
Do you stamp oilfield equipment skids and foundations?
Yes. We design and seal foundations and anchorage for skids, tanks, compressors and separators, plus pipe supports, access platforms and OSHA stairs, for operators and fabricators working in Lea and Eddy counties and across the Permian Basin.
Where in New Mexico do you work?
Statewide. We prepare plans for Albuquerque, Rio Rancho, Santa Fe, Las Cruces, Farmington, Roswell, Hobbs and Carlsbad, as well as rural properties under CID jurisdiction. Plans are delivered electronically and formatted for each reviewing agency.