New York PE Stamp and Permit-Ready Plans
Need a PE stamp in New York? Drawings sealed by a New York-licensed engineer for NYC DOB filings and upstate and Long Island jurisdictions.
- Stamped by a PE licensed in New York
- Prepared for New York building departments
- Residential, commercial and industrial
Two code systems, one New York engineering team
A PE stamp in New York means working within two separate code systems. New York City writes and enforces its own Construction Codes through the Department of Buildings, while the rest of the state follows the New York State Uniform Fire Prevention and Building Code, enforced by cities, towns and villages. A drawing set that is perfect for a town building inspector in Saratoga County would not be accepted by the DOB as filed, and the reverse is also true.
We prepare drawings for both. In the five boroughs, that means alteration filings for apartment and brownstone renovations, steel dunnage for rooftop equipment, interior demolition and new openings in bearing walls, and commercial fit-outs. On Long Island and in Westchester, it is additions, second stories, decks and homes in coastal flood zones. Upstate, from the Hudson Valley to Buffalo, we design garages, barns, pole buildings and agricultural structures for heavy snow. Our steel structure design service handles rooftop and building steel.
The engineer who seals your drawings holds a New York license and works through our network of state-licensed PEs. Whether the reviewer is a DOB plan examiner in Manhattan or a part-time code enforcement officer in a rural town, we price the work as a fixed fee, usually quoted the same day, and resolve objections or comments within the original scope at no extra charge.
How licensing works. Engineering drawings must be sealed by a Professional Engineer licensed in New York. PE Engineer works with a network of state-licensed PEs, so every set is reviewed and stamped by an engineer with an active license in New York. Their name and license number appear on the seal, exactly as your building department requires.
Popular in New York
- NYC apartment and brownstone alterations
- Rooftop equipment dunnage and steel framing
- Long Island additions and second stories
- Coastal flood-zone homes and elevations
- Upstate garages, barns and pole buildings
- Commercial fit-outs and change of use
Engineering services for New York projects
Filings for the DOB and drawings for upstate and Long Island code offices, across all four engineering disciplines.
Structural engineering in New York
Steel and wood framing for alterations and additions, bearing wall openings in masonry rowhouses, rooftop dunnage, snow and drift design for upstate roofs, and pile or pier foundations for coastal homes.
Architectural plans in New York
Floor plans, sections and egress layouts for apartment renovations, additions and new homes, plus commercial fit-out and occupancy change drawings coordinated with zoning and fire requirements.
MEP engineering in New York
HVAC and ventilation design, plumbing and gas piping plans, electrical drawings, sprinkler and fire alarm plans, kitchen exhaust systems, and energy code compliance for both NYC and state energy codes.
Industrial and equipment in New York
Equipment anchorage and support steel for mechanical rooms and roofs, mezzanines and storage racks for warehouses, crane and hoist beams, and OSHA stairs and guardrails for upstate manufacturing plants.
Your Stamped, Permit-Ready Plans Start With One Upload
Send your drawings or describe the project. A licensed engineer reviews it and sends a clear, fixed-fee proposal, often within hours.
- Free and no obligation
- Reviewed by a licensed PE
- Secure file upload
New York State and New York City codes
Outside New York City, the Uniform Code applies statewide and is administered by the Department of State. It adopts the International Codes with New York amendments and is enforced by the local city, town or village code enforcement office. New York City has its own code family, enforced by the DOB. We design to the edition your jurisdiction has adopted.
- New York State Uniform Fire Prevention and Building Code, including the Building Code and Residential Code of New York State
- Fire Code of New York State and the state Energy Conservation Construction Code
- NYC Construction Codes, including the NYC Building, Mechanical, Plumbing and Fuel Gas Codes
- NYC Energy Conservation Code and NYC Electrical Code
- ASCE 7 for loads, plus AISC 360, ACI 318 and the NDS
Lake-effect snow, coastal floods and urban wind
Snow drives design across much of upstate New York. Lake-effect bands off Lake Erie and Lake Ontario bring heavy accumulations to Buffalo, the Southern Tier, the Tug Hill Plateau and the Syracuse area, and the Adirondacks and Catskills add elevation to the mix. Drift loads at roof steps and parapets often govern framing on garages, barns and commercial buildings. Frost penetrates deep in the north country, so footings are set to local frost depth. For agricultural and rural projects, see our pole barns and metal buildings page.
Downstate, flooding and wind are the main concerns. Large parts of Brooklyn, Queens, Staten Island and Long Island’s south shore sit in mapped coastal flood zones, where elevation, flood-resistant materials and foundation type are regulated. Hurricanes and nor’easters raise wind pressures near the coast, and in Manhattan and other dense areas, wind on tall buildings and rooftop equipment needs careful anchorage. Older masonry buildings throughout the state also call for close attention to existing conditions before new openings or loads are added.
How the permit process works in New York
In New York City, most work is filed electronically with the Department of Buildings by a licensed Professional Engineer or Registered Architect, then reviewed by a plan examiner who may issue objections. Outside the city, the local code enforcement officer for the town, village or city reviews plans and issues the building permit, and many smaller municipalities accept email or paper submittals.
- Confirm zoning, landmarks or flood-zone requirements that affect the design.
- We prepare sealed drawings and calculations formatted for the DOB or your local code office.
- The examiner or code officer reviews and issues objections or comments.
- We resolve each item, revise the drawings, and the permit is issued for work and inspections.
Buildings in New York City historic districts may need Landmarks Preservation Commission approval before the DOB will issue a permit, so we plan exterior work with that review in mind. Our remodel and renovation plans cover apartment and brownstone work.
Cities and counties we serve in New York
- New York City
- Buffalo
- Rochester
- Yonkers
- Syracuse
- Albany
- New Rochelle
- Mount Vernon
- Schenectady
- Utica
- White Plains
- Binghamton
- Kings County
- Queens County
- Nassau County
- Suffolk County
- Westchester County
- Erie County
Plus every other city, town and county in New York.
How it works, start to finish
From your first message to stamped drawings, you work directly with the engineering team.
- 1Share your projectSend the address, scope and any drawings, photos or plan-check comments. Two minutes is enough.
- 2Receive a fixed-fee proposalAn engineer reviews the scope and replies with a firm price and delivery date for your project in New York.
- 3Engineering and draftingWe run the calculations and prepare drawings to the codes your jurisdiction enforces, checked before sealing.
- 4Stamped set deliveredYou receive a sealed PDF set ready to submit, and we answer any plan-check comments within scope.
Have a Question? Get a Real Engineer's Answer in Minutes
Skip the guesswork. Chat live with a licensed engineer about your drawings, code requirements or permit comments, free and with no obligation.
- Free and no obligation
- Reviewed by a licensed PE
- Secure file upload
PE stamp and permit FAQs for New York
Can you provide a PE stamp for my project in New York?
Yes. Each New York project is reviewed and sealed by a Professional Engineer licensed in New York, through our network of state-licensed PEs. That covers both NYC DOB filings and projects in upstate and Long Island municipalities.
Do you prepare drawings for NYC Department of Buildings filings?
Yes. We prepare structural, architectural and MEP drawings to the NYC Construction Codes for alteration and new work filings, and respond to plan examiner objections. Your filing representative or our team can coordinate the electronic submission.
Is the code different upstate than in New York City?
Yes. New York City has its own Construction Codes and Energy Conservation Code, while the rest of the state uses the Uniform Code and the state Energy Conservation Construction Code. We confirm which applies and prepare drawings to that system.
Can you design for heavy snow loads in Buffalo or the Tug Hill region?
Yes. We use the ground snow load your municipality requires and design for drifting at roof steps, parapets and adjacent structures. That applies to new garages, barns and additions, and to checks of existing roofs before solar or equipment is added.
Where in New York do you work?
Statewide. We prepare plans for all five boroughs of New York City, Long Island, Westchester and the Hudson Valley, the Capital Region, Syracuse, Rochester, Buffalo and rural counties. Plans are delivered electronically and formatted for the agency reviewing your project.
Also serving nearby states
Get your free New York proposal
Tell us where the project is and what you need. Attach any drawings, photos or plan-check comments. A licensed engineer reviews every request.
- Upload your filesPlans, sketches, photos or comments
- Get a fixed-fee proposalUsually the same day
- Receive stamped drawingsSealed by a PE licensed in your state