Michigan engineering services
PE Stamp and Permit-Ready Plans in Michigan
Michigan Building Code and Residential Code drawings with a PE stamp from a Michigan-licensed engineer, from Detroit plants to Up North cottages.
- Stamped by a PE licensed in Michigan
- Accepted by Michigan building departments
- Residential, commercial and industrial
From Detroit plant floors to Lake Michigan cottages
Michigan’s building work splits into two very different worlds. In metro Detroit, Grand Rapids and Lansing, much of the demand comes from manufacturers and their suppliers who need a PE stamp in Michigan for new production lines, mezzanines, conveyor supports and crane beams. Up North and along the Great Lakes shoreline, the projects are cottages, garages and pole barns built to survive lake-effect snow and lakeshore wind.
PE Engineer prepares sealed drawings for both. Every set is sealed by a Professional Engineer licensed in Michigan through our network of state-licensed PEs and prepared to the Michigan codes adopted under the state’s single construction code act. Because the same code applies across Michigan, a well-prepared set reads the same way to a reviewer in Troy as to one in Traverse City.
Our Michigan work includes platforms and mezzanines and equipment anchorage for automotive and industrial plants, basement finishes and egress windows in the suburbs, lakefront homes and cottage additions, and restaurant and retail build-outs in growing downtowns. Quotes are fixed-fee and usually same day, rush service is available when a line installation or closing date is close, and comments from plan review are answered within the original scope at no extra charge.
How licensing works. Engineering drawings must be sealed by a Professional Engineer licensed in Michigan. PE Engineer works with a network of state-licensed PEs, so every set we deliver is reviewed and stamped by an engineer who holds an active license in Michigan. Their name and license number appear on the seal, exactly as your building department requires.
Popular in Michigan
- Automotive and industrial plant equipment
- Lakefront homes and cottage additions
- Basement finishes and egress windows
- Pole barns and detached garages
- Roof framing for lake-effect snow
- Restaurant and retail build-outs
Michigan PE stamp and engineering services
Structural, architectural, MEP and industrial engineering under one fixed-fee quote for Michigan projects.
Structural engineering in Michigan
Snow and drift loads for lake-effect regions, frost-depth footings and basement walls, steel and wood framing, beam and wall-removal calculations, pole barns and garages, and wind design to ASCE 7 for Great Lakes shoreline sites.
Architectural plans in Michigan
Floor plans, elevations, sections and site plans for homes, cottages, additions and commercial spaces, prepared to the Michigan Residential Code or Michigan Building Code with egress and accessibility details.
MEP engineering in Michigan
Mechanical plans to the Michigan Mechanical Code, plumbing layouts to the Michigan Plumbing Code, electrical drawings, energy code compliance for a cold climate, and fire sprinkler, fire alarm and kitchen hood design.
Industrial and equipment stamps in Michigan
Equipment anchorage, conveyor and process supports, mezzanines, storage racks, crane runways and hoist beams, and OSHA stairs and guardrails for automotive, furniture, food and chemical plants in Michigan.
Michigan's single state construction code
Michigan adopts one set of construction codes for the whole state under the Stille-DeRossett-Hale Single State Construction Code Act. The codes are administered by the Bureau of Construction Codes within the Department of Licensing and Regulatory Affairs (LARA). Cities, townships and counties may enforce the code locally; where they do not, the state Bureau of Construction Codes enforces it directly. We design to the edition currently in effect.
- Michigan Residential Code, based on the IRC
- Michigan Building Code, based on the IBC
- Michigan Rehabilitation Code for Existing Buildings, based on the IEBC
- Michigan Mechanical Code and Michigan Plumbing Code
- Michigan Electrical Code, based on NFPA 70
- Michigan Energy Code and ASCE 7 design loads
Lake-effect snow, frost and shoreline hazards
Snow is the defining structural load in much of Michigan. Cold air crossing Lake Michigan and Lake Superior drops heavy lake-effect snow on the western Lower Peninsula and across the Upper Peninsula, where ground snow loads are far higher than in Detroit or Ann Arbor. Taller buildings beside lower roofs collect deep drifts, and older cottages were seldom framed for today’s design values, so roof reinforcement is a common request. Frost penetrates deeply, especially in the north, which affects footing depth, basement wall design and slab-on-grade detailing.
The Great Lakes shoreline brings its own rules. Bluffs and dunes erode, and parts of the shoreline are designated high-risk erosion areas or critical dunes where state permits and setbacks apply before you build. Southern Michigan sees severe thunderstorms and occasional tornadoes, and heavy rain events have flooded basements in the Detroit area, which makes foundation drainage and waterproofing worth getting right. River valleys across the state have mapped floodplains, and soils range from sandy glacial deposits to clays with poor drainage, so we ask about site conditions before sizing footings.
Permitting a project in Michigan
Most Michigan permits come from the city, village, township or county that has chosen to enforce the state code, and many offer online applications. Where a community does not enforce it, permits are issued by the state Bureau of Construction Codes. Electrical, mechanical and plumbing work usually requires separate trade permits pulled by licensed contractors.
- Find out whether your local unit or the state issues permits for your address.
- Submit sealed drawings, calculations and the building permit application.
- We respond to plan review comments and revise within the original scope at no extra charge.
- Receive the permit, pull trade permits and complete inspections.
Building on the shoreline? Ask us about coordinating the structure with the setback and erosion requirements, and see our foundation design service for bluff and dune sites.
Cities and counties we serve in Michigan
- Detroit
- Grand Rapids
- Warren
- Sterling Heights
- Ann Arbor
- Lansing
- Dearborn
- Livonia
- Troy
- Farmington Hills
- Flint
- Kalamazoo
- Traverse City
- Marquette
- Wayne County
- Oakland County
- Macomb County
- Kent County
Plus every other city, town and county in Michigan. If your project is in Michigan, we can stamp it.
How it works
From first message to stamped drawings, you deal directly with the engineering team.
Step 1
Send your project
Fill out the quote form with the address, scope and any drawings, photos or plan-check comments you already have. Two minutes is enough.
Step 2
Get a fixed-fee quote
An engineer reviews the scope and replies with a clear fixed price and delivery date for your project in Michigan. No hourly surprises.
Step 3
Engineering and drafting
We run the calculations, prepare the drawings to the codes your jurisdiction enforces, and check every sheet before sealing.
Step 4
Stamped set delivered
You receive the sealed PDF set ready to submit. If the plan reviewer has comments, we answer them and revise at no charge within scope.
PE stamp and permit plan FAQs for Michigan
Can you provide a PE stamp for my project in Michigan?
Yes. A Professional Engineer licensed in Michigan, working through our network of state-licensed PEs, checks the design and applies the seal. Because Michigan uses one statewide construction code, the same sealed set can go to a city, township, county or the state Bureau of Construction Codes.
Do you engineer equipment and mezzanines for Michigan manufacturing plants?
Yes. We design mezzanines, platforms, conveyor and pipe supports, crane runways and equipment anchorage, and we check existing slabs and steel for new loads. Sealed calculations are prepared for local permits, corporate engineering review and insurers.
Can you check my cottage roof for lake-effect snow?
Yes. We evaluate existing rafters, trusses and beams against the ground snow load and drift conditions for your address, then provide a sealed letter or reinforcement drawings. This is a common request when buying, renovating or adding onto an older cottage.
Do you prepare plans for basement finishes and egress windows?
Yes. We prepare floor plans and structural details for finished basements, including egress window wells, header openings in foundation walls and any wall removals. The plans are organized for the Michigan Residential Code requirements your local inspector will check.
Do you work in the Upper Peninsula and northern Michigan?
Yes. We prepare drawings for Marquette, the Keweenaw, Traverse City, Petoskey and rural townships across northern Michigan, as well as the Detroit, Grand Rapids and Lansing metro areas. Loads are calculated for each specific site.