Utah engineering services
PE Stamp and Permit-Ready Plans in Utah
Drawings sealed by a Utah-licensed Professional Engineer and designed for Wasatch Fault seismic forces, mountain snow loads and Utah's statewide code.
- Stamped by a PE licensed in Utah
- Accepted by Utah building departments
- Residential, commercial and industrial
Building along the Wasatch Fault and up into the snow
Most Utahns live close to the Wasatch Fault, a long, active normal fault running along the base of the mountains from north of Ogden to south of Provo. That puts much of Salt Lake, Davis, Weber and Utah counties in high seismic design categories. A few miles east, the same mountains deliver some of the deepest snowpack in the West. A PE stamp in Utah usually means an engineer has worked through both: lateral design for earthquakes and roof framing for heavy, elevation-dependent snow.
PE Engineer prepares permit-ready structural, architectural and MEP drawings for homeowners, builders, developers and businesses across Utah. Each set is sealed by a Professional Engineer licensed in Utah through our network of state-licensed engineers, and prepared to the statewide code and the local requirements of your city or county.
Typical Utah projects include basement apartments and ADUs along the Wasatch Front, additions and new homes in the growing suburbs of Utah County and southern Salt Lake County, mountain homes in Park City and the Cottonwood canyons, seismic upgrades to older brick homes, and warehouse and manufacturing work in the Salt Lake valley and around St. George.
How licensing works. Engineering drawings must be sealed by a Professional Engineer licensed in Utah. PE Engineer works with a network of state-licensed PEs, so every set we deliver is reviewed and stamped by an engineer who holds an active license in Utah. Their name and license number appear on the seal, exactly as your building department requires.
Popular in Utah
- Basement apartments and accessory dwelling units
- Additions and new homes in Wasatch Front suburbs
- Mountain homes and cabins in high snow areas
- Seismic retrofit of older masonry homes
- Warehouse racks, mezzanines and equipment anchorage
- Commercial tenant improvements and restaurants
Engineering services for Utah projects
Structural, architectural, MEP and industrial drawings coordinated for Utah building departments.
Structural engineering in Utah
Seismic lateral design for Wasatch Front sites, elevation-based ground snow loads and drift for mountain homes, foundations for collapsible and expansive soils, retaining walls, beam calculations and basement egress window openings.
Architectural plans in Utah
Floor plans, elevations and site plans for basement apartments, ADUs, additions, new homes and commercial spaces, drawn to the Utah-amended IRC or IBC and your city's zoning standards.
MEP engineering in Utah
HVAC, electrical and plumbing plans, energy code compliance for cold-climate homes, solar PV drawings, fire sprinkler and fire alarm plans, and commercial kitchen hood systems for Utah restaurants.
Industrial and equipment stamps in Utah
Seismic anchorage and bracing for equipment, tanks and storage racks, steel platforms and mezzanines for distribution centers, and OSHA stairs, ladders and guardrails for Utah plants and warehouses.
Utah building codes we design to
Utah adopts the International Codes statewide as its State Construction Code, with amendments set at the state level. Cities and counties enforce the same code rather than writing their own, which keeps the technical rules consistent from Logan to St. George. The state amendments address Utah conditions, including how ground snow loads are determined at elevation. We prepare drawings to the edition and amendments currently in force.
- International Building Code (IBC) with Utah amendments
- International Residential Code (IRC) with Utah amendments
- International Plumbing, Mechanical and Fuel Gas Codes as adopted in Utah
- National Electrical Code (NFPA 70)
- International Energy Conservation Code (IECC) with Utah amendments
- ASCE 7 for seismic, snow and wind loads
Design loads and hazards in Utah
Seismic design shapes nearly every Wasatch Front building. Shear walls, hold-downs, diaphragms and foundation anchorage must be calculated for strong ground shaking, and sites on the soft lakebed sediments of the Salt Lake and Utah valleys can amplify motion or liquefy. Many older homes in Salt Lake City, Ogden and Provo are built of unreinforced brick, which performs poorly in earthquakes. We design seismic retrofits that tie walls, floors and roofs together and anchor the house to its foundation.
Snow is the other major load. Ground snow increases with elevation, so a house in Park City, Alta or Brian Head needs much stronger roof framing than the same plan in the valley, and drifting behind ridges, parapets and dormers can control the design. Southern Utah trades snow for heat and soil problems, with expansive and collapsible soils around St. George and Cedar City. Steep foothill lots, landslide-prone slopes and wildfire risk in the wildland-urban interface also shape site and foundation design.
How the permit process works in Utah
Utah cities and counties issue building permits and perform plan review, often with online submittals in Salt Lake City, West Valley City, Provo and the larger suburbs. Some smaller jurisdictions use third-party plan review firms. Because the code is statewide, review comments tend to focus on the same core items: seismic and snow design criteria, egress, energy compliance and fire separation.
- Check zoning, especially for basement apartments and ADUs, which many cities regulate through local ordinance.
- Submit sealed architectural, structural and energy documents, plus MEP drawings where needed.
- Address any corrections the reviewer issues. Revisions inside the original scope are included at no extra charge.
- Receive the permit and schedule inspections.
Mountain and canyon projects may also need geotechnical reports, fire department review and sometimes watershed or slope approvals. We flag those early so they do not hold up the building permit. For hillside lots, our retaining wall design and foundation work is coordinated with the geotechnical recommendations from the start.
Cities and counties we serve in Utah
- Salt Lake City
- West Valley City
- West Jordan
- Provo
- Orem
- Sandy
- St. George
- Ogden
- Layton
- South Jordan
- Lehi
- Millcreek
- Herriman
- Logan
- Draper
- Park City
- Salt Lake County
- Utah County
Plus every other city, town and county in Utah. If your project is in Utah, we can stamp it.
How it works
From first message to stamped drawings, you deal directly with the engineering team.
Step 1
Send your project
Fill out the quote form with the address, scope and any drawings, photos or plan-check comments you already have. Two minutes is enough.
Step 2
Get a fixed-fee quote
An engineer reviews the scope and replies with a clear fixed price and delivery date for your project in Utah. No hourly surprises.
Step 3
Engineering and drafting
We run the calculations, prepare the drawings to the codes your jurisdiction enforces, and check every sheet before sealing.
Step 4
Stamped set delivered
You receive the sealed PDF set ready to submit. If the plan reviewer has comments, we answer them and revise at no charge within scope.
PE stamp and permit plan FAQs for Utah
Can you provide a PE stamp for my project in Utah?
Yes. Utah projects are sealed by a Professional Engineer licensed in Utah through our network of state-licensed PEs. The seal carries the engineer’s name and license number, and the structural calculations accompany the drawings for your plan reviewer.
Do you design basement apartments in Utah?
Yes. We prepare plans for basement apartments and accessory dwelling units, including egress windows cut into foundation walls, fire separation, ceiling heights and mechanical changes. We also check your city’s ordinance, since parking and owner-occupancy rules vary across the Wasatch Front.
How do snow loads work for a mountain home in Utah?
Utah’s code amendments base ground snow loads on location and elevation, so loads in Park City or the canyons are far higher than in the valley. We calculate roof snow and drift loads for your exact site and design rafters, trusses, beams and connections to carry them.
Can you retrofit an older brick home in Salt Lake City?
Yes. We evaluate unreinforced masonry homes and design retrofits such as roof-to-wall ties, wall anchors, bracing and foundation connections. Seismic retrofits are often paired with remodels or additions, when walls and ceilings are already open, which makes the work less disruptive and lets the new and existing structure be designed as one system.
How fast can I get Utah permit drawings?
Quotes are fixed fee and usually go out the same day. Most residential packages are delivered within a few business days, and rush service is available when a closing, construction loan or contractor start date is approaching. Larger commercial and industrial sets are scheduled at the time of the quote.